Garden Solar Pest Repeller

Garden Solar Pest Repeller

A kind of solar energy device making use of ultrasonic to expel moles.

To expel rodents(applicable to such animals as moles and shrews),operated on solar energy
Thank you for your purchasing Garden Solar Pest Repeller.Transmitting ultrasonic via vibration,Garden solar pest repeller is used to affect the acute hearing of underground rodents,with very effective preventive effect.The ultrasonic will deceive them,making them feel endangered,so so to force them away from the vibrating area.Transmitting ultrasonic every 30 seconds,Garden Solar Pest Repeller has an effective range of 650 square meters.

Garden Solar Pest Repeller Radiates in all directions.Durning Radiation,there shall be no any obstruction to tamper with the ultrasonic .To achieve the best performance,we strongly recommend that 2 devices be installed every 30 meter for those areas frequented by rodents.

Garden Solar Pest Repeller works on a solar cell,while the other rechargeable cell is charged for nocturnal use.When a cell is fully charged .It can supply power when lights to drive Garden Solar Pest Repeller,So as to ensure continuous 48-hour operation.

Parameters:
Dimension: 43cm x 15.5cm x15.5cm
Weight: 360g
Power supply: solar energy cell,or long-effective Ni-Cad cell recharged by solar enegy
Frequency: 400Hz-1000Hz

Matters for attention:
The ground shall be chaecked when getting out the device,frozen earth,irrigated ground or waterlogged ground is forbidden.First ,dig a hole in solid earth to place the device,and the density of earth will greatly affect the effective running of the device.A certain error margin shall be reserved according to the density of the earth will greatly affect the effecticve running of the device.A certain error margin shall be reserved according to the density of the earth prior to measuring the actually effective range.

No hammer shall be used when installing,no excessive force shall be applied,so as to avoid damaging the device.

Installation wizard:
1) Connect the two connectors on the aluminum bar onto the joints on the top,watch out that the colors of the joints shall match: red with red,and black with black (please refer to the following illustration)



2) Fix the bar and the top together
3)Insert the bar into the earth ,be careful not to use execssive force to damage the device,or bump into any obstruction.The base of the top shall be exposed to the outside,about 1cm above the ground.